5500
Manufacturer: ITT Goulds
Goulds 5500 Severe Duty Slurry Pumps.
Goulds Model 5500 is the result of many years of experience designing and building severe duty slurry pumps. It's not only built to stand up to the toughest abrasive slurry services, but also is designed for extreme ease of maintenance and safety. A heavy duty bearing frame and shaft, extra thick wall sections and easily replaceable wear parts add up to many years of service even under the severest operating conditions.
• Capacities to 14000 GPM (3180 m3/h)
• Heads to 425 feet (139m)
• Temperatures to 250° F (121° C)
• Pressures to 500 PSIG (3448 kPa)
• Solids to 5 inches (127 mm)
• T slot Bearing: allows ease of disassembly and reassembly less downtimelow maintenance costs.
• Cast In Lifting Lugs: on all major wet end components facilitates handling for less downtime, greater safety and lower maintenance cost. No special tools required.
• Knock Off Deflector: Protects bearings; facilitates threaded impeller removal. Less maintenance time, lower maintenance costs.
• Flat Bottom Bearing Housing: double register fit assures positive alignment and perfect fit with no shimming. Less maintenance and downtime.
• Bearing Housing Hold Down Bolts: accessible from the top, facilitates impeller end clearance adjustment; simplifies power end removal. Less downtime, low maintenance cost.
• Dynamic Seal: expeller Option For Absolute Dry Box Sealing. Expeller and step cut impeller engineered for positive stuffing box sealing. No outside flush required. Saves water, piping costs; eliminates product loss. All sizes performance tested.
• Heads to 425 feet (139m)
• Temperatures to 250° F (121° C)
• Pressures to 500 PSIG (3448 kPa)
• Solids to 5 inches (127 mm)
• T slot Bearing: allows ease of disassembly and reassembly less downtimelow maintenance costs.
• Cast In Lifting Lugs: on all major wet end components facilitates handling for less downtime, greater safety and lower maintenance cost. No special tools required.
• Knock Off Deflector: Protects bearings; facilitates threaded impeller removal. Less maintenance time, lower maintenance costs.
• Flat Bottom Bearing Housing: double register fit assures positive alignment and perfect fit with no shimming. Less maintenance and downtime.
• Bearing Housing Hold Down Bolts: accessible from the top, facilitates impeller end clearance adjustment; simplifies power end removal. Less downtime, low maintenance cost.
• Dynamic Seal: expeller Option For Absolute Dry Box Sealing. Expeller and step cut impeller engineered for positive stuffing box sealing. No outside flush required. Saves water, piping costs; eliminates product loss. All sizes performance tested.