Belt Screen EscaMax®

Manufacturer: Huber Technologies

Versatile inlet screen
Excellent separation efficiency due to its perforations
Reliable cleansing of the perforated plates with a rotating brush
Very compact system with minimum space requirements
Easy-to-retrofit into existing channels
The EscaMax® complements the well-known HUBER program for municipal and industrial wastewater screening, as it is particularly well suited in situations where excellent separation efficiency is required in deep channels with high water levels.

The sturdy EscaMax® screen is able to reliably cope with high amounts of gravel and grit. The two-dimensional screening elements prevent especially long fibres from passing through the screen and thus achieve the maximum separation efficiency.

Perforated screening elements provide superior separation efficiency in comparison with bar screening elements. It has been determined that two-dimensional perforations are better than one-dimensional bars.

Formation of screenings rolls is prevented by rake bars extending over the full width of the screen in combination with the screen's installation angle. Even cans and bottles are lifted by these rakes.

At their upper turning point the perforated plates are continuously cleaned by a fast counter-rotating brush which increases the cleaning energy and thus significantly improves the cleaning efficiency. Cleaning is supported by an integrated spray bar.

Excellent separation efficiency due travelling perforated plates
Reliable cleansing of the perforated plates with a rotating brush
No scraper roller for trough edge cleaning required
All bearings are maintenance-free. All submerged bearings are wear-resistant ceramic bearings.
Compact design with a low installation height above ground level
Completely odour-encased screen with easy to remove covers
Easy-to-retrofit into existing channels, installation without channel recesses possible
The screen consists of a self-supporting folded stainless steel profile so that it can easily be lifted out of the channel.
Not hindered by gravel or grit
Simple and easy-to-access chain tensioning unit
All machine components in contact with the medium are made of stainless steel and acid treated in a pickling bath (except chains, drives, bearings). As an option, the chains and chain wheels are available in stainless steel.