HC with ME I 6 Motor

Product information "Drum pump for residual emptying - solvent"
Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (mechanical seal)

Description:
The Drum pump is suitable for low viscosity, flammable and combustible liquids and hydrocarbons. Perfectly suited for the removal or transfer of explosive media and solvents.
• Optionally available with Ex - plug
• Pump tube equipped with Lutz original hand wheel
• Suitable for Drum emptying alternative fuels, oils, flammable liquids

Technical data
▼ MEDIUM ▼
Suitable media: Essigsäure, Ethanol, Styrol, Toluol, Nikotin, Butylacetat, Äththylacetat, Aceton, Petroleum, Ameisensäure, Methanol, Kerosin, Isopropanol, Butanol, Benzin
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FEP ummantelt
Mechanical seal (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 18,5, 48
delivery head (up to max. ft)*: 49, 118
Temperature of medium (max °F): 212
density (up to kg/dm³): 1,7, 2.8
Operating pressure (max. psi): 87
Viscosity (up to max. cps)*: 600, 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Mechanical seal (MS)
Immersion length: from 39" (1000 mm), from 47" (1200 mm)
Immersion tube diameter (up to mm): 1.6
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion Protection: explosion-proof
Type of drive: Electric, Compressed air
Output (W): 640, 1000
Voltage: 120
Frequency (Hz): 60