SF Series
Manufacturer: BJM Pumps
Electric submersible pumps with single vane or double vane impellers for municipal, industrial and agricultural wastewater. The SF Series pumps have non-clog, single vane or double vane impellers designed for high volume and lift performance for liquids up to 200°F.
• Longer power cord – Standard 33ft. power cord.
• 304 stainless steel motor housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
• Three seal motor protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber.
• Winding protection and (NEMA) Class R motor insulation with a thermal cut-out switch that will allow the stator to have a winding temperature up to 300°F (150°C), superior to pumps with Class A and B insulation.
• Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
• Specifications dependent on model and may change without notice.
• 304 stainless steel motor housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
• Three seal motor protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber.
• Winding protection and (NEMA) Class R motor insulation with a thermal cut-out switch that will allow the stator to have a winding temperature up to 300°F (150°C), superior to pumps with Class A and B insulation.
• Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
• Specifications dependent on model and may change without notice.